STILER FREZARKA DO PNI 15 KM, STUMP GRINDER pārdošanā - Polija

Cena bez PVN
1 404 EUR
6 340 PLN
Cena bez PVN
1 404 EUR
6 340 PLN
PAMATINFORMĀCIJA
Produktu grupaKoku stumbru frēze
Zīmols / modelisSTILER FREZARKA DO PNI 15 KM, STUMP GRINDER
Reģistrācijas gads2020
Papildus iespējasJauns
Mašīnas atrašanās vietaSokołów Podlaski
Valsts
Mascus ID7A00E572
IZCENOJUMS
Izvēlieties valūtu
Cena bez PVN1 404 EUR  (6 340 PLN)
PVN (23%)323 EUR
Cena ar PVN1 727 EUR  (7 798 PLN)
PAPILDUS INFORMĀCIJA
PapildinformācijaMilling machine STILER grubber is designed for milling and removing trunks of felled trees.
The milling disk is driven by a motor BRIGGS & STRATTON with a capacity of 420cm3 and 15 hp, providing adequate power and torque.
The grubber makes it possible to crush the trunk to a depth of 300 mm!
The device is only 80 cm wide, especially useful in hard to reach places. The interchangeable teeth on the milling disk are covered with sintered carbide (widia) that ensures high hardness of the blade.
The latest model of the STILER 15 mm combustion cutter

Technical data:

CE certificate: YES
Engine: BRIGGS & STRATTON, air-cooled, 4-stroke OHV, gasoline engine
Engine power: 15.0 hp
Capacity: 420 cm3
Commissioning: manual
Fuel: Unleaded gasoline
Fuel tank capacity: 6.5 liters
Head drive: belt transmission
Brake: disc
Number of cutting teeth: 12 interchangeable teeth, widiowe
Milling depth: up to 300 mm
Milling width: 55 mm
Dimensions (length x width x height): 152x75x112 mm
Tire size: 13 "
Weight: 125 kg
Warranty: 24/36 months

The powerful 15 hp 4-stroke OHV motor with 420cm3 capacity of the well-known and appreciated BRIGGS & STRATTON brand allows us to mill even very hard trunks. The large power reserve also translates into a longer machine life.

The machine's blade is equipped with 12 interchangeable teeth with sintered carbides. It is currently the hardest material used for this type of machine. It can handle even the hardest tree without the slightest problem.

The milling machine has a disc brake lever. It serves to block one wheel during milling. Thanks to this solution, the machine does not run away while working and ensures even guidance along the trunk.

A separate mechanism driving the disc is activated by a second lever.

STILER PRZEMYSŁAW BAŃKOWSKI

+48 ...RĀDĪT
Lūdzu, atsaucieties uz Mascus, kad sazinieties ar pārdevēju.
Sūtīt e-pastu

Pārdevēja vārds/uzvārds

  • KAMIL DMOWSKI

    STILER PRZEMYSŁAW BAŃKOWSKI
    • +48 ...RĀDĪT
      Lūdzu, atsaucieties uz Mascus, kad sazinieties ar pārdevēju.
    • +48 ...RĀDĪT
      Lūdzu, atsaucieties uz Mascus, kad sazinieties ar pārdevēju.
    • Tartaczna 4, 08-300 Sokołów Podlaski, Polija

Uzņēmums

STILER PRZEMYSŁAW BAŃKOWSKI
1
GADUS SADARBOJAS AR MASCUS

Saistītās markas

MarkaSludinājumu skaits
John Deere1057
Timberjack481
Ponsse452
Valmet407
Caterpillar346

Portālā Mascus Jūs atradīsiet sludinājumus, kas izvietoti sadaļā [Other] STILER FREZARKA DO PNI 15 KM, STUMP GRINDER koku stumbru frēzes. Tehnikas [Other] STILER FREZARKA DO PNI 15 KM, STUMP GRINDER cena ir 1 404 €. Tehnika atrašanās vieta ir Sokołów Podlaski Polija. Mascus portālā Jūs atradīsiet vēl vairāk [Other] STILER FREZARKA DO PNI 15 KM, STUMP GRINDER piedāvājumu, kā arī cita veida zīmolu tehniku, kas izvietota sadaļā "koku stumbru frēzes".